Della 9

The Electronic Control Della 9® is based on micro processor
technology with a dual core processor like applied in smart phones.
It gives many possibilities of controlling the cooling machine i.e.
temperature control, power consumption, data recording, detailed
incident reporting etc.. the controller Della 9® has a graphic
interface with a touch screen TFT Display. The User Interface is so
direct that anyone will find it user-friendly, it is very simple to operate.

The cooling system units and all functioning of the mortuary refrigerator is
being managed by a touch screen microprocessor control system. The
control system has a data recording system and Ethernet through which,
you can connect it to the BMS, all required alarms are included in our
new system. The system can also be connected to the local network or
internet and all alarms and functions of the unit can be controlled remotely.

Hardware Display:
1) TFT display with minimum size of 9” true colors 24 bpp with
resistive touch screen interface
2) Low power supply for display in the range between 12-24 Vdc.
3) Serial communication between display and mortuary refrigerator
is RS485
4) Display can be installed at any place within a range of 200 M
distance from the mortuary refrigerator.
5) SD card or micro SD Card data storage for long life data storage for
each refrigeration unit.
6) GSM plug in board as an option for 3G connection
7) Ethernet connection
8) USB port for download data storage and upload firmware and

software updating

Software Display:
1) Linux embedded operating system based.
2) Possibility to connect the display to the BMS with support Modbus
TCP protocol.
3) Web server based integrated
4) Corpse storage management system (CSMS) showing all corpse
data with displaying the name of the corpse during
occupation, with recording all movements of corpse. Using color
code to indicate immediately if the cell is Free of corpse or occupied.
5) CSMS controlled remotely from the central administration office for
data entry, and the real-time situation.
6) Continuous graph of cold room Temp and set point. With Temp
digital indication.
7) Unlimited identified password for different levels of operators and users
8)
9)
Possibility to records temperature in degree Celsius or Fahrenheit
10)
Recording frequency every 30 seconds
11)
All setting and calibration through TFT display

Special password for locking system (Option)

Hardware controller:
1) Switching power supply for 110/220V – 50/60Hz
2) 2 NTC probes (Chamber and evaporator)
3) Humidity probe.
4) PT 100 probe
5) UPS and Battery back-up with system recharge for monitoring system and data storage
6) RS485 communications with twin modes compatible

Alarm system:

1) Remote relay alarm system.
Electrical power: 230V 50/60 Hz 1 Ph