An autopsy (post-mortem examinationobductionnecropsy, or autopsia cadaverum) is a surgical procedure that consists of a thorough examination of a corpse by dissection to determine the cause, mode and manner of death or to evaluate any disease or injury that may be present for research or educational purposes. (The term “necropsy” is generally reserved for non-human animals; see below). Autopsies are usually performed by a specialized medical doctor called a pathologist. In most cases, a medical examiner or coroner can determine cause of death and only a small portion of deaths require an autopsy.

ATF-260 - Autopsy Table fixed with basin

ATF-260 – Autopsy Table fixed with basin
The Autopsy table is mounted on a center support column and is entirely made of stainless steel (material no. 1.4301 – ANSI 304). The work surface features a high, profiled surround and a seamlessly welded basin is affixed to the end of the table. The table top is equipped with sound-proofing and features a negative inclination arranged diagonally to the drain. All power connections are built into the base.

AT-260 V AUTOPSY TABLE with vertical adjustment and basin

AT-260 V AUTOPSY TABLE with vertical adjustment and basin
The Autopsy table is mounted on a center support column and is vertically adjustable in the range from 750 to 1000 mm. The Autopsy table is entirely made of stainless steel (material no. 1.4301 – ANSI 304). The work surface features a high, profiled surround and a seamlessly welded basin is affixed to the end of the table.
The table top is equipped with sound-proofing and features a negative inclination arranged diagonally to the drain. All power connections are built into the base.

 

Autopsy table ATF-260 R with fixed height and rotating basin

Autopsy table ATF-260 R with fixed height and rotating basin

The Autopsy table is mounted on a center support column and can be rotated to the right
and the left by approx. 180°; The Autopsy table is entirely made of stainless steel (material no. 1.4301 – ANSI 304).

The work surface features a high, profiled surround and a seamlessly welded basin is affixed to the end of the table. The table top is equipped with sound-proofing and features a negative inclination arranged diagonally to the drain. All power connections are built into the base.

Autopsy table AT-260 VR with vertical adjustable and rotating with basin

Autopsy table AT-260 VR with vertical adjustable and rotating with basin

The Autopsy table is mounted on a center support column and can be rotated to the right and the left by approx. 180°; moreover, it is vertically adjustable in the range from 750 to 1000 mm. The Autopsy table is entirely made of stainless steel (material no. 1.4301 – ANSI 304). The work surface features a high, profiled surround and a seamlessly welded basin is affixed to the end of the table. The table top is equipped with sound-proofing and features a negative inclination arranged diagonally to the drain. All power connections are built into the base.

Autopsy table ATF-260 V fixed with integrated down-draft system

Autopsy table ATF-260 V fixed with integrated down-draft system

The Autopsy table is mounted to a central support column and is made entirely from
stainless steel (material no. 1.4301 – ANSI 304). Through a three-piece, removable, perforated rest area, all unsanitary odors are safely vacuumed away. The work surface is equipped with a high surrounding border, as well as a channel to the waste sieve (detachable). A seamlessly welded basin with a surrounding profile border is affixed to the end of the table.
A bath with drainage channel is located under the perforated work surface. An integrated
sprinkler system guarantees that the table is continuously sanitized. All power connections, including the air duct, are built into the base. The table is to be connected to the side mounted ventilation system, which has a minimum capacity of 1000 m³/h.

AUTOPSY TABLE height adjustable with integrated down-draft system ATV-260 V

AUTOPSY TABLE height adjustable with integrated down-draft system ATV-260 V

The Autopsy table is mounted to a central support column and is made entirely from stainless steel (material no. 1.4301 – ANSI 304). Through a three-piece, removable, perforated rest area, all unsanitary odors are safely vacuumed away. The work surface is equipped with a high surrounding border, as well as a channel to the waste sieve (detachable). A seamlessly welded basin with a surrounding profile border is affixed to the end of the table. A bath with drainage channel is located under the perforated work surface. An integrated sprinkler system guarantees that the table is continuously sanitized. All power connections, including the air duct, are built into the base. The table is to be connected to the side mounted ventilation system, which has a minimum capacity of 1000 m³/h.

Autopsy table ATV-260 RV height adjustable and rotating with down-draft system

Autopsy table ATV-260 RV height adjustable and rotating with down-draft system

The Autopsy table is mounted on a center support column and can be rotated to the right
and the left by approx. 180°; moreover, it is vertically adjustable in the range from 750 to
1000 mm. The Autopsy table is entirely made of stainless steel (material no. 1.4301- ANSI 304). A seamlessly welded basin with a surrounding profile border is affixed to the end of the table.A bath with drainage channel is located under the perforated work surface. An integrated sprinkler system guarantees that the table is continuously sanitized. All power connections,including the air duct, are built into the base. The table is to be connected to the side-ventilation system, which has a minimum capacity of 1000 m³/h.

Autopsy table ATV-260 RO/V roll in height adjustable with integrated down-draft system

Autopsy table ATV-260 RO/V roll in height adjustable with integrated down-draft system

The Autopsy table is mounted to a central support column and is made entirely from
stainless steel (material no. 1.4301 – ANSI 304). Through a three-piece, removable, perforated rest area, all unsanitary odours are safely vacuumed away. The work surface is equipped with a high surrounding border, as well as a channel to the waste sieve (detachable). A seamlessly welded basin with a surrounding profile border is affixed to the end of the table.
A bath with drainage channel is located under the perforated work surface. An integrated
sprinkler system guarantees that the table is continuously sanitized. All power connections, including the air duct, are built into the base. The table is to be connected to the side mounted ventilation system, which has a minimum capacity of 1000 m/h.